Material Drying
7 visualizações
PETG dryer dew point too high, insufficient drying
Fenómeno do problema
The dehumidifying dryer dew point is too high (>-30°C), drying is insufficient.
Análise das causas
The desiccant (molecular sieve) is ineffective or saturated, the regeneration system is faulty, and dew point detection is inaccurate.
Solução
Check and replace the desiccant; repair the regeneration system; ensure dew point ≤-40°C.
Conclusão principal
PETG drying effect depends on the dew point; dryer maintenance cannot be ignored.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!