Material Analysis
7 visualizações
Unsatisfactory Toughening Effect of Modified polyamide 6 (nylon 6)
Fenómeno do problema
The toughening effect of modified polyamide 6 (nylon 6) is unsatisfactory, and the impact strength improvement is lower than the expected target
Análise das causas
The amount of toughening agent added is insufficient or the dispersion is uneven
The compatibility between the toughening agent and the matrix is poor, and the interfacial bonding is weak
The processing temperature is improper (deviating from 230-270°C), and the toughening agent degrades or is poorly dispersed
The mixing is insufficient, and the toughening agent agglomerates
The particle size of the toughening agent does not match
Solução
Increase the amount of toughening agent to a reasonable ratio
Select a toughening agent with good compatibility with polyamide 6 (nylon 6)
Reasonably set the processing temperature within the range of 230-270°C
Strengthen mixing to ensure uniform dispersion
Select a toughening agent with a suitable particle size
Conclusão principal
The toughening effect needs to be addressed from the amount added, compatibility, and dispersion
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!