Material Analysis
5 visualizações
Unsatisfactory Toughening Effect of Modified Acrylate-Epoxy-Phosphate-Distyrene Copolymer
Fenómeno do problema
The toughening effect of modified acrylate-epoxy-phosphate-distyrene copolymer is unsatisfactory, and the impact strength improvement is lower than the expected target
Análise das causas
The toughening agent addition amount is insufficient or the dispersion is uneven
The compatibility between the toughening agent and the matrix is poor and the interfacial bonding is weak
The processing temperature is improper (deviating from 200-260°C), and the toughening agent degrades or is poorly dispersed
Insufficient mixing, and the toughening agent agglomerates
The particle size of the toughening agent does not match
Solução
Increase the toughening agent addition amount to a reasonable ratio
Select a toughening agent with good compatibility with the acrylate-epoxy-phosphate-distyrene copolymer
Reasonably set the processing temperature according to the 200-260°C range
Strengthen mixing to ensure uniform dispersion
Select a toughening agent with a suitable particle size
Conclusão principal
The toughening effect needs to be addressed from the addition amount, compatibility, and dispersion
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!