Molds & Tooling
17 visualizações
Product dimensional accuracy difficult to control
Fenómeno do problema
PEI products have large dimensional deviations, making it difficult to meet precision fit requirements
Análise das causas
PEI shrinkage rate (0.5-1.0%) is very sensitive to mold temperature and holding conditions; every 1°C of mold temperature fluctuation can cause a shrinkage rate change of 0.02-0.05%
Solução
Strictly control mold temperature within ±2°C; optimize the setting of holding pressure and time; correct mold dimensions based on actual measured shrinkage rate
Conclusão principal
The dimensional accuracy of PEI products is highly dependent on the stability of process parameters
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!