Coating peeling on the core rod surface

In the injection '2079851475616104457 production process, the product exhibits the quality defect of "Coating peeling on the core rod surface".The specific manifestation is The chrome plating or coating on the core rod surface peels off affecting parison surface quality.This defect is more common when processing materials such as PET, PP, HDPE and PS, and its occurrence is usually related to unreasonable settings of injection pressure, parison temperature, blowing pressure and mold temperature.When the Coating peeling on the core rod surface situation is severe, it will cause a series of chain quality defects in the product's appearance, dimensional accuracy, mechanical properties and other aspects, which not only reduces the product's functionality and safety in use, but also directly increases the scrap rate and production cost.Therefore, this problem requires systematic diagnosis and optimization from multiple dimensions such as material selection, the status of the injection '2079851475616104457 machine, core rod, parison mold, blow mold and transfer mechanism, and injection pressure, parison temperature, blowing pressure and mold temperature.

1. Poor coating quality.This factor causing the problem reflects that certain process conditions or material properties in injection '2079851475616104457 do not meet the optimal forming requirements.Such problems are often cumulative and concealed, and should be investigated and verified as key focus items during process debugging and finalization to ensure hidden dangers are eliminated at the source. 2. Long-term high-temperature use of the core rod.This factor causing the problem reflects that certain process conditions or material properties in injection '2079851475616104457 do not meet the optimal forming requirements.Such problems are often cumulative and concealed, and should be investigated and verified as key focus items during process debugging and finalization to ensure hidden dangers are eliminated at the source. 3. Mechanical wear.Mechanical wear and loosening during long-term equipment operation will cause clearance changes, decreased accuracy and unstable operation, thereby triggering various process and quality problems.Establishing a regular inspection and preventive maintenance system for equipment operating status, and timely repairing or replacing worn parts, is a necessary measure to maintain equipment accuracy and process stability. In terms of equipment maintenance, the regular overhaul and accuracy confirmation of the injection '2079851475616104457 machine, core rod, parison mold, blow mold and transfer mechanism are not in place, causing the actual operating parameters of the equipment to deviate from process requirements, which will also become a potential inducement of the Coating peeling on the core rod surface problem.

1. Re-electroplate the core rod surface.Before implementing this measure, its feasibility and expected effects should be fully evaluated, plan details communicated and confirmed with relevant technical personnel, key quality indicator changes closely monitored during implementation, adjustment effects recorded and fed back in a timely manner, forming reusable process experience. 2. Select wear-resistant coating material.Before introducing new tools, new materials or new methods, sufficient applicability evaluation and small-batch verification should be carried out.It is recommended to first conduct offline tests or simulation analyses outside production conditions, and introduce them into the formal production line only after confirming effectiveness and safety.Keep proper change management records to facilitate subsequent traceability and experience accumulation. 3. Lower the core rod working temperature.Adjustments should follow the principle of gradual progress; each adjustment should not be too large, and a decrement of 5%~15% of the current value is recommended.After each adjustment, stably observe the product quality changes for at least 5~10 mold cycles, and continue adjusting only after confirming the improvement direction is correct; never make excessive one-step adjustments. In terms of material management, incoming inspection of raw materials and in-process testing of work-in-progress should be strengthened, and key performance indicators of PET, PP, HDPE and PS should be strictly controlled to ensure the stability of forming quality from the source.

In summary, the causes of the "Coating peeling on the core rod surface" problem can be attributed to the combined action of multiple factors such as Poor coating quality, Long-term high-temperature use of the core rod.To solve this problem, it is necessary to start from aspects such as Re-electroplate the core rod surface, Select wear-resistant coating material and take systematic governance measures.In actual production, it is recommended to establish a prevention and rapid response mechanism for this problem, achieving stable production and continuous improvement through parison wall thickness uniformity and transfer temperature control.