Extrusion & Post
6 görüntüleme
ASA FDM printing temperature
Sorun Belirtisi
[Problem phenomenon] ASA filament printing nozzle clogging, weak interlayer or deformation, temperature parameters confused
Neden Analizi
ASA FDM extrusion temperature 240-270°C (eSUN) or 245-265°C (3DTrcek), bed temperature 90-110°C and enclosed chamber required; temperature too low weak interlayer, too high degradation and strong odor
Çözüm
Extrusion temperature start optimization from 245-265°C; bed temperature 90-110°C; enclosed chamber reduces warpage; fan 0% or minimal cooling; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
Temel Çıkarım
ASA printing 245-265°C with 90-110°C bed temperature, chamber indispensable; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!