Injection Molding
7 görüntüleme
PA6 Short Shot
Sorun Belirtisi
Material shortage at the ends of thin-wall parts and long-flow parts.
Neden Analizi
PA6 solidifies quickly, and the flow front freezes quickly at thin walls; insufficient injection speed/pressure and low mold temperature.
Çözüm
①Increase injection speed and pressure;②increase material temperature and mold temperature;③enlarge the gate;④select high-flow grades for thin-wall parts.
Temel Çıkarım
PA6 short shot = a race against freezing speed.
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!