Extrusion & Post
5 görüntüleme
Poor plating adhesion on PA6 products
Sorun Belirtisi
Poor adhesion after electroplating/spraying, coating peeling off.
Neden Analizi
Surface release agent, additive exudation, and water absorption affect the treatment; surface condition determines adhesion; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience.
Çözüm
①Avoid using release agent in '2079851475616104452 as much as possible, use process means for demolding instead; ②surface cleaning treatment; ③control exudation; ④perform cross-cut adhesion verification; ⑤post-treat after conditioning stabilizes.
Temel Çıkarım
PA6 adhesion='surface condition': cleaning and controlling exudation are the key; nylon water absorption and additive exudation both affect surface treatment, the front end must be controlled; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence.
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!