Extrusion & Post
3 visualizaciones
Poor plating adhesion on PA6 products
Fenómeno del problema
Poor adhesion after electroplating/spraying, coating peeling off.
Análisis de la causa
Surface release agent, additive exudation, and water absorption affect the treatment; surface condition determines adhesion; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience.
Solución
①Avoid using release agent in '2079851475616104452 as much as possible, use process means for demolding instead; ②surface cleaning treatment; ③control exudation; ④perform cross-cut adhesion verification; ⑤post-treat after conditioning stabilizes.
Conclusión clave
PA6 adhesion='surface condition': cleaning and controlling exudation are the key; nylon water absorption and additive exudation both affect surface treatment, the front end must be controlled; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence.
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!