Molds & Tooling
4 görüntüleme
PC Jetting Marks
Sorun Belirtisi
[Problem Phenomenon] Snake-shaped jetting marks near the PC gate
Neden Analizi
High speed through a too-small gate jets directly into the empty cavity; the front folds into marks; when troubleshooting on site, verify each item according to this mechanism one by one, and avoid blindly adjusting the machine based on experience alone; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
Çözüm
Lap fan gate against the wall; gate facing the core; reduce the initial speed; after adjustment, take samples continuously to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes, so as to locate effective measures
Temel Çıkarım
PC jetting marks rely on the gate wall-impinging arrangement; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!