Material Analysis
12 görüntüleme
PLA Melt Temperature 170-230℃
Sorun Belirtisi
Low melt temperature causes poor plasticization; high temperature causes a sharp viscosity drop, product embrittlement and discoloration
Neden Analizi
PLA melting point is 155-185℃, processing window 170-230℃; it is recommended to set the heater 40-50℃ above the melting point; above 240℃ degradation accelerates, and molecular weight and viscosity drop rapidly
Çözüm
①Melt temperature 170-230℃ adjusted according to the process; ②Sheet extrusion 170-230℃; ③Try not to exceed 240℃, over-temperature processes paired with 50ppm drying
Temel Çıkarım
PLA temperature window 170-230℃; the setting principle of 40-50℃ above the melting point balances plasticization and degradation prevention; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!