Processing Machinery
4 görüntüleme
Taboo of mixing POM with PVC
Sorun Belirtisi
PVC regrind was mistakenly mixed into a POM machine, producing a large amount of irritating gas during molding
Neden Analizi
PVC decomposition releases HCl, which in contact with POM catalyzes its violent degradation, producing large amounts of formaldehyde and other gases; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
Çözüm
Strictly separate zones and equipment for POM and PVC; stop and clean immediately if mixing is suspected; manage regrind identification; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
Temel Çıkarım
Mixing POM with PVC is a safety-accident-level taboo; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!