Processing Machinery
7 visualizaciones
Taboo of mixing POM with PVC
Fenómeno del problema
PVC regrind was mistakenly mixed into a POM machine, producing a large amount of irritating gas during molding
Análisis de la causa
PVC decomposition releases HCl, which in contact with POM catalyzes its violent degradation, producing large amounts of formaldehyde and other gases; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
Solución
Strictly separate zones and equipment for POM and PVC; stop and clean immediately if mixing is suspected; manage regrind identification; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
Conclusión clave
Mixing POM with PVC is a safety-accident-level taboo; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!