Molds & Tooling
5 görüntüleme
PP Shrinkage 1.0-2.5 Management
Sorun Belirtisi
[Problem Phenomenon] PP product dimensional deviation is large, shrinkage fluctuates obviously
Neden Analizi
PP shrinkage 1.0-2.5% is a wide range, greatly affected by wall thickness, holding pressure, mold temperature, and crystallization; directional (flow/transverse) differences are also obvious; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based on experience alone
Çözüm
Measure shrinkage compensation according to grade and wall thickness; lock mold temperature and holding pressure; glass fiber grades have lower shrinkage; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
Temel Çıkarım
PP shrinkage 1.0-2.5% is a wide range; actual measurement compensation and locked process; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar future problems
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!