Molds & Tooling
6 görüntüleme
PS Product Gate Design
Sorun Belirtisi
Stress concentration and cracking at the gate.
Neden Analizi
PS is sensitive to notches, and the gate mark becomes the starting point of fracture; improper gate form and trimming method aggravate the problem.; during on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based only on experience
Çözüm
①Optimize gate form and position; ②trim flat; ③avoid stressed areas; ④select submarine gates for appearance surfaces.; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
Temel Çıkarım
The gate is the weak link of PS products; attention should be paid to both design and post-processing.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!