Molds & Tooling
5 görüntüleme
TPU Mold Temperature 20-70°C
Sorun Belirtisi
Poor product surface gloss and high internal stress, or excessively high mold temperature prolonging the cycle and causing demolding deformation
Neden Analizi
TPU mold temperature affects surface quality and internal stress: low mold temperature gives rough surface and high stress; mold temperature 20-70°C is adjusted according to hardness, and high-hardness parts can use a higher mold temperature
Çözüm
①Mold temperature conventionally 20-70°C; ②High-hardness parts take the upper limit; ③When surface requirements are high, appropriately increase the mold temperature; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
Temel Çıkarım
TPU mold temperature is the balance between surface and stress; fine-tune within the 20-70°C range according to hardness and appearance requirements; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!