Material Drying
5 görüntüleme
TPU Drying Time Management
Sorun Belirtisi
To rush output, TPU drying time was compressed to 2 hours and the defect rate soared
Neden Analizi
TPU moisture diffuses slowly from inside the particles; with 2 hours of drying the core moisture is not fully removed; when troubleshooting on site, verify item by item according to this mechanism to avoid blindly adjusting the machine based only on experience
Çözüm
Drying time guaranteed at 3-4 hours; extend when the loading amount is large; subject to measured moisture content; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
Temel Çıkarım
TPU drying time cannot be compressed, and is judged by actual measurement; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!