Material Drying
8 visualizaciones
TPU Drying Time Management
Fenómeno del problema
To rush output, TPU drying time was compressed to 2 hours and the defect rate soared
Análisis de la causa
TPU moisture diffuses slowly from inside the particles; with 2 hours of drying the core moisture is not fully removed; when troubleshooting on site, verify item by item according to this mechanism to avoid blindly adjusting the machine based only on experience
Solución
Drying time guaranteed at 3-4 hours; extend when the loading amount is large; subject to measured moisture content; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
Conclusión clave
TPU drying time cannot be compressed, and is judged by actual measurement; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!