Material Drying
6 görüntüleme
TPU Extrusion Bubbles
Sorun Belirtisi
TPU extruded products have surface bubbling, are not smooth, and transparency decreases
Neden Analizi
During TPU extrusion, moisture vaporizes to form bubbles; uneven melt temperature produces surface defects; extrusion pressure fluctuations make dimensions unstable; insufficient drying is the primary cause of bubbles; when troubleshooting on site, verify item by item according to this mechanism, avoiding blind machine adjustment based solely on experience
Çözüm
①Strictly dry to 0.02% before extrusion; ②uniform control of melt temperature; ③stabilize extrusion pressure to prevent fluctuations; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
Temel Çıkarım
Bubble management for TPU extrusion is stricter than for '2079851475616104452; the 0.02% red line plus pressure stability is the foundation of surface quality; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!