Material Drying
9 visualizaciones
TPU Extrusion Bubbles
Fenómeno del problema
TPU extruded products have surface bubbling, are not smooth, and transparency decreases
Análisis de la causa
During TPU extrusion, moisture vaporizes to form bubbles; uneven melt temperature produces surface defects; extrusion pressure fluctuations make dimensions unstable; insufficient drying is the primary cause of bubbles; when troubleshooting on site, verify item by item according to this mechanism, avoiding blind machine adjustment based solely on experience
Solución
①Strictly dry to 0.02% before extrusion; ②uniform control of melt temperature; ③stabilize extrusion pressure to prevent fluctuations; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
Conclusión clave
Bubble management for TPU extrusion is stricter than for '2079851475616104452; the 0.02% red line plus pressure stability is the foundation of surface quality; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!