Extrusion & Post
11 görüntüleme
Die deposit and carbon buildup in EVA extrusion
Sorun Belirtisi
After EVA extrusion shutdown, brown carbon deposit layer found on die inner wall; after restarting, black specks on product surface
Neden Analizi
EVA oxidatively decomposes and carbonizes under prolonged heating in die stagnation zone; die not cleaned in time during shutdown; extrusion temperature too high accelerating carbonization
Çözüm
1) Flush die with pure PE for 3-5min before shutdown to remove EVA residue; 2) Disassemble and clean die immediately after shutdown; 3) Lower extrusion temperature by 5-10°C to reduce carbonization tendency; 4) Optimize die flow channel to reduce dead zones in stagnation areas
Temel Çıkarım
Die carbon buildup is caused by thermal oxidation and untimely cleaning; PE flushing and timely cleaning are key
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!