Molds & Tooling
5 görüntüleme
CEF surface gloss poor
Sorun Belirtisi
The surface gloss of the CEF product is <60%, lower than the 80% requirement, and the appearance is dull
Neden Analizi
The mold surface is rough Ra>0.4μm; the CEF crystallinity is high and the surface microcrystals scatter light; the cooling rate is improper
Çözüm
1) Polish the mold to Ra<0.1μm mirror surface; 2) Increase the mold temperature to delay crystallization and reduce scattering; 3) Add a nucleating agent to control the crystallization size
Temel Çıkarım
Poor gloss is caused by rough mold and crystallization scattering; polishing the mold and controlling crystallization are the key
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!