Molds & Tooling
5 görüntüleme
CEF length out of tolerance
Sorun Belirtisi
The length deviation of the CEF product is >±0.5mm, exceeding the tolerance
Neden Analizi
The CEF shrinkage rate is unstable and fluctuates ±0.5%; the mold size design does not consider shrinkage compensation; the cooling is insufficient and the size is not stabilized
Çözüm
1) Accurately measure the CEF shrinkage rate and compensate the mold; 2) Fully cool to ensure dimensional stability; 3) Annealing treatment to eliminate post-shrinkage
Temel Çıkarım
Length out of tolerance is caused by unstable shrinkage rate; accurate shrinkage compensation is the key
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!