Extrusion & Post
11 görüntüleme
DSTDP extruded pipe ovality exceeding standard
Sorun Belirtisi
DSTDP extruded pipe ovality >1.05, exceeding the 1.02 standard requirement
Neden Analizi
Pipe cooling uneven, single-side cooling; sizing sleeve design unreasonable; haul-off clamping force uneven causing pipe compression deformation
Çözüm
1) Adopt annular spray cooling to ensure uniform temperature drop; 2) optimize sizing sleeve inner diameter and taper design; 3) multi-track uniform clamping haul-off; 4) increase vacuum sizing section length to ensure full sizing
Temel Çıkarım
Ovality is caused by uneven cooling and clamping; annular cooling and uniform haul-off are key
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!