Extrusion & Post
12 مشاهدة
DSTDP extruded pipe ovality exceeding standard
ظاهرة المشكلة
DSTDP extruded pipe ovality >1.05, exceeding the 1.02 standard requirement
تحليل الأسباب
Pipe cooling uneven, single-side cooling; sizing sleeve design unreasonable; haul-off clamping force uneven causing pipe compression deformation
الحل
1) Adopt annular spray cooling to ensure uniform temperature drop; 2) optimize sizing sleeve inner diameter and taper design; 3) multi-track uniform clamping haul-off; 4) increase vacuum sizing section length to ensure full sizing
الخلاصة الأساسية
Ovality is caused by uneven cooling and clamping; annular cooling and uniform haul-off are key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!