Injection Molding
4 görüntüleme
Glass Fibre wall thickness too thin
Sorun Belirtisi
Glass Fibre product wall thickness 10-15% thinner than design value
Neden Analizi
Injection pressure insufficient, mold not completely filled in thin-wall region; Glass Fibre melt viscosity high, flow difficult; mold temperature too low accelerates freezing
Çözüm
1) Raise injection pressure 80-100MPa; 2) raise processing temperature to lower viscosity; 3) raise mold temperature to delay freezing
Temel Çıkarım
Thin wall is caused by insufficient injection; raising pressure and temperature are key
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!