Injection Molding
5 مشاهدة
Glass Fibre wall thickness too thin
ظاهرة المشكلة
Glass Fibre product wall thickness 10-15% thinner than design value
تحليل الأسباب
Injection pressure insufficient, mold not completely filled in thin-wall region; Glass Fibre melt viscosity high, flow difficult; mold temperature too low accelerates freezing
الحل
1) Raise injection pressure 80-100MPa; 2) raise processing temperature to lower viscosity; 3) raise mold temperature to delay freezing
الخلاصة الأساسية
Thin wall is caused by insufficient injection; raising pressure and temperature are key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!