Extrusion & Post
5 görüntüleme
POE extrusion profile bending deformation
Sorun Belirtisi
POE extruded profile shows continuous bending after cooling, bending amount >5mm/m
Neden Analizi
Uneven cooling of each face of the profile causes shrinkage differences; uneven die output flow velocity makes each wall thickness of the profile different; haul-off and extrusion centerline not aligned, producing lateral force
Çözüm
1) Optimize cooling system to ensure uniform cooling of each face; 2) Adjust the die so that flow velocity of each wall is uniform and wall thickness consistent; 3) Align haul-off with extrusion centerline; 4) Increase sizing sleeve length, cool after full sizing
Temel Çıkarım
Profile bending is caused by uneven cooling and uneven flow velocity; uniformization and alignment are the solution key
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!