Injection Molding
5 görüntüleme
PETG '2079851475616104452 in-mold pressure too high
Sorun Belirtisi
During PETG '2079851475616104452, the cavity pressure is too high, causing flash, mold deformation or equipment alarm.
Neden Analizi
Injection pressure too high, melt viscosity too low (processing temperature too high), insufficient venting back pressure, wall thickness too thin and filling resistance large.
Çözüm
Appropriately reduce injection pressure and speed; lower the barrel temperature to 230-250°C; improve venting; increase wall thickness or enlarge the gate.
Temel Çıkarım
PETG in-mold pressure abnormality requires comprehensive adjustment of pressure, temperature and venting.
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!