Injection Molding
8 visualizaciones
PETG '2079851475616104452 in-mold pressure too high
Fenómeno del problema
During PETG '2079851475616104452, the cavity pressure is too high, causing flash, mold deformation or equipment alarm.
Análisis de la causa
Injection pressure too high, melt viscosity too low (processing temperature too high), insufficient venting back pressure, wall thickness too thin and filling resistance large.
Solución
Appropriately reduce injection pressure and speed; lower the barrel temperature to 230-250°C; improve venting; increase wall thickness or enlarge the gate.
Conclusión clave
PETG in-mold pressure abnormality requires comprehensive adjustment of pressure, temperature and venting.
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!