Molds & Tooling
6 مشاهدة
LCP Mold Cavity Dimension Design
ظاهرة المشكلة
Mold dimensions designed according to conventional shrinkage allowance are all out of tolerance.
تحليل الأسباب
LCP's near-zero shrinkage in the flow direction means the cavity must be machined directly to final dimensions; following the polyolefin shrinkage coefficient approach is doomed to fail.; during on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based solely on experience
الحل
①Machine the cavity directly close to final dimensions; ②leave only a small shrinkage allowance in the transverse direction; ③fine-tune after first article actual measurement; ④establish LCP-specific shrinkage allowance rules.
الخلاصة الأساسية
LCP mold design must abandon traditional shrinkage allowance thinking; near-zero shrinkage means the mold is the product dimension.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!