Material Drying
6 مشاهدة
LCP Product Bubbles
ظاهرة المشكلة
Bubbles inside the product.
تحليل الأسباب
Moisture on the pellet surface vaporizes or degradation generates gas; at high temperatures, moisture is the main source.; during on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based solely on experience
الحل
①Fully dry to below 0.01%; ②control melt temperature upper limit; ③shorten residence time; ④improve venting.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
الخلاصة الأساسية
LCP bubbles are mainly of the moisture type; strict drying solves the vast majority.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!