Processing Machinery
6 مشاهدة
LDPE Film Screw L/D Ratio
ظاهرة المشكلة
Poor plasticizing with many gel particles; evaluation finds the screw L/D ratio is insufficient.
تحليل الأسباب
A screw with a short L/D ratio has insufficient plasticizing and mixing travel, leaving unmelted particles; film-grade production requires sufficient plasticizing capacity.; During on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience.
الحل
①Select a screw with sufficient L/D ratio; ②Equip a barrier mixing structure; ③Optimize temperature compensation; ④Regularly test plasticizing quality.; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability.
الخلاصة الأساسية
Screw configuration is the hardware foundation of plasticizing quality; film production should not save cost on the screw.; After confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!