Blow Molding
7 مشاهدة
LLDPE lab-scale comparison
ظاهرة المشكلة
Lab-scale blown film and mass-production film have different properties
تحليل الأسباب
Differences in equipment shear and cooling conditions; when troubleshooting on site, verify item by item according to this mechanism to avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
الحل
Convert lab-scale results by coefficient; verify on production machine; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes to facilitate locating effective measures
الخلاصة الأساسية
Scale-up from lab test to mass production requires verification; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!