Processing Machinery
5 مشاهدة
PA66 product shrinkage rate out of tolerance
ظاهرة المشكلة
Overall dimensional deviation, poor assembly.
تحليل الأسباب
Shrinkage 1.5%~2.5% value selection improper; holding has great influence; wall thickness differences also cause deviation; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience.
الحل
①Measure actually and repair the mold; ②optimize holding pressure and switchover point, taking into account both feeding and internal stress; ③unify measurement state; ④measure shrinkage by wall thickness and repair the mold with differentiated compensation; ⑤use CAE analysis to assist decision-making when necessary.
الخلاصة الأساسية
PA66 dimension='measured correction': shrinkage rate measured by wall thickness, differentiated compensation; unified measurement state is the premise; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!