Molds & Tooling
5 مشاهدة
PBT product jetting marks
ظاهرة المشكلة
Snake-shaped marks in front of the gate.
تحليل الأسباب
High-speed jetting filling; small gate and open cavity.; when troubleshooting on site, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first when troubleshooting
الحل
①Multi-stage injection with low speed at the initial stage; ②enlarge the gate; ③adjust gate position; ④increase material temperature.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
الخلاصة الأساسية
Jetting marks are controlled by the speed curve.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!