Molds & Tooling
5 مشاهدة
PBT Poor Demolding
ظاهرة المشكلة
The product sticks to the mold and is scratched, deforms during ejection, and improvement is limited after mold temperature and holding pressure adjustment
تحليل الأسباب
PBT poor demolding stems from excessive holding pressure, too high mold temperature and insufficient cooling, and insufficient draft angle; glass fiber material has large mold-gripping force; polishing and draft angle are the mold-side foundation
الحل
①Reduce holding pressure and mold temperature; ②Ensure draft angle ≥0.5°; ③Polish the cavity to reduce friction; after adjustment, take samples continuously to verify the effect, and resume mass production only after confirming stability
الخلاصة الأساسية
PBT poor demolding is investigated along three lines: pressure, temperature, and structure; the basic condition of the mold is fundamental; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!