Molds & Tooling
5 مشاهدة
PC/ABS black speck
ظاهرة المشكلة
Black specks appear in parts.
تحليل الأسباب
Carbonized material in dead corners of the barrel and hot runner falls off; material contamination.; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based on experience alone; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
الحل
①Thorough cleaning; ②shorten residence time; ③regular disassembly and inspection; ④strengthen material management.; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
الخلاصة الأساسية
Black specks point to equipment cleanliness; regular machine cleaning is institutionalized.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems later
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!