Injection Molding
8 مشاهدة
PC/ABS injection speed profile
ظاهرة المشكلة
Many defects with a single speed.
تحليل الأسباب
Requirements differ at each stage; the profile is not optimized.; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based on experience alone; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
الحل
①Multi-stage injection profile; ②initial stage prevents jetting; ③middle stage filling; ④final stage prevents overpacking.; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
الخلاصة الأساسية
Multi-stage injection is the basis of fine molding.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems later
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!