Injection Molding
2 visualizações
PC/ABS injection speed profile
Fenómeno do problema
Many defects with a single speed.
Análise das causas
Requirements differ at each stage; the profile is not optimized.; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based on experience alone; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
Solução
①Multi-stage injection profile; ②initial stage prevents jetting; ③middle stage filling; ④final stage prevents overpacking.; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
Conclusão principal
Multi-stage injection is the basis of fine molding.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems later
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!