Molds & Tooling
5 مشاهدة
PC Uneven Gloss
ظاهرة المشكلة
[Problem Phenomenon] Regional gloss differences on PC high-gloss parts
تحليل الأسباب
Uneven mold temperature and cavity surface differences; PC gloss is sensitive to mold temperature and stress; when troubleshooting on site, verify each item according to this mechanism one by one, and avoid blindly adjusting the machine based on experience alone; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
الحل
Uniform mold temperature at the upper limit; consistent cavity polishing; venting optimization; after adjustment, take samples continuously to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes, so as to locate effective measures
الخلاصة الأساسية
For PC gloss difference, check mold temperature uniformity; stress also affects it; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!