Injection Molding
13 مشاهدة
PLA product flash
ظاهرة المشكلة
Flash at the parting line.
تحليل الأسباب
Insufficient clamping or mold wear; excessive injection pressure.; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
الحل
① Check the clamping force; ② repair the parting line; ③ reduce pressure; ④ repair wear.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes to facilitate locating effective measures
الخلاصة الأساسية
Flash distinguishes between clamping and wear causes.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!