Injection Molding
7 visualizações
PLA product flash
Fenómeno do problema
Flash at the parting line.
Análise das causas
Insufficient clamping or mold wear; excessive injection pressure.; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
Solução
① Check the clamping force; ② repair the parting line; ③ reduce pressure; ④ repair wear.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes to facilitate locating effective measures
Conclusão principal
Flash distinguishes between clamping and wear causes.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!