Injection Molding
13 مشاهدة
Multi-stage Injection of PLA Products
ظاهرة المشكلة
Unreasonable speed curve.
تحليل الأسباب
A single speed is hard to balance everything; PLA requires a refined curve.; During on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience; this mechanism has been repeatedly verified by industry literature and should be confirmed first during troubleshooting
الحل
①Multi-stage injection; ②Initial stage to prevent jetting; ③Middle stage filling; ④Final stage to prevent overfilling and degradation.; After adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
الخلاصة الأساسية
Multi-stage injection protects PLA from shear damage.; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!