Injection Molding
7 visualizações
Multi-stage Injection of PLA Products
Fenómeno do problema
Unreasonable speed curve.
Análise das causas
A single speed is hard to balance everything; PLA requires a refined curve.; During on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience; this mechanism has been repeatedly verified by industry literature and should be confirmed first during troubleshooting
Solução
①Multi-stage injection; ②Initial stage to prevent jetting; ③Middle stage filling; ④Final stage to prevent overfilling and degradation.; After adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
Conclusão principal
Multi-stage injection protects PLA from shear damage.; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!