Extrusion & Post
13 مشاهدة
POM Shrinkage Out of Tolerance
ظاهرة المشكلة
POM part dimensions are smaller than the drawing and inconsistent between batches
تحليل الأسباب
POM shrinkage is 1.8-3.5% and is greatly affected by mold temperature and holding pressure; the mold shrinkage value does not match the actual process; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
الحل
Measure actual shrinkage to correct the mold; lock mold temperature and holding pressure; SPC monitoring of critical dimensions; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
الخلاصة الأساسية
POM dimensional management is based on measured shrinkage; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for subsequent similar problems
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!