Injection Molding
8 مشاهدة
PP Injection Part Sink Mark—Freeze-off Type
ظاهرة المشكلة
Although the gate is small and holding time is already long, thick walls still have sink marks.
تحليل الأسباب
The small gate freezes off early, and holding pressure cannot continue to transmit to thick-wall areas; no matter how long the holding time, it is ineffective.
الحل
①Enlarge the gate to delay freeze-off; ②place the gate near thick-wall areas; ③reduce material at thick walls; ④auxiliary gates if necessary.
الخلاصة الأساسية
Holding after freeze-off = ineffective feeding—the gate is the key.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!