Molds & Tooling
6 مشاهدة
PPS product venting design
ظاهرة المشكلة
Air trap problems.
تحليل الأسباب
PPS high temperature has high air trap risk; venting must be sufficient.; During on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
الحل
①Improve the venting system; ②focus on the end; ③depth control to prevent flash; ④regular cleaning.; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
الخلاصة الأساسية
PPS venting depth must balance flash prevention; low viscosity requires shallower vent grooves.; After confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!