Material Analysis
13 مشاهدة
PPS Full Regrind Feasibility
ظاهرة المشكلة
Attempting high-ratio regrind production, strength retention is unexpectedly good but appearance declines
تحليل الأسباب
Research shows that after 7 recycling cycles, PPS regrind still retains about 85% of its mechanical properties, and its thermal stability is better than most engineering plastics; but appearance and color deteriorate cycle by cycle, and parts with high appearance requirements still need restricted use
الحل
①The regrind ratio can be relaxed for internal structural parts; ②Appearance parts are still controlled at 25-30%; ③Record cycle counts and conduct performance sampling; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
الخلاصة الأساسية
PPS's regrind tolerance stands out among engineering plastics; the 85% retention rate gives large reuse room for internal parts; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!