Injection Molding
8 مشاهدة
PVC Injection Mold Sticking
ظاهرة المشكلة
Products stick to mold and get pulled damaged, demolding difficult.
تحليل الأسباب
High holding pressure, small draft angle, improper mold temperature; degraded material is more sticky and easier to stick; poor cavity polishing also aggravates; during on-site troubleshooting, verify item by item according to this mechanism, avoid blindly adjusting the machine based solely on experience.
الحل
①Appropriately reduce holding pressure to reduce clamping force and frozen internal stress; ②Increase demolding draft angle to reduce demolding resistance; ③Prevent degradation; ④Polish cavity; ⑤Extend cooling time, demold after products are fully set.
الخلاصة الأساسية
PVC mold sticking = 'pressure + draft + degradation': degraded material being stickier is PVC's characteristic; besides reducing pressure and temperature, anti-degradation and polishing are equally important; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!